Perfect Floor Restoration – Filling Cracks & Chips & More

With just a little bit of attention to detail, it is possible to bring back the beauty of floors that have seen better days. Here are some easy tips to get your floor back into shape, from filling cracks and chips to addressing scuff marks and other surface issues.

Board Shrinkage

Hardwood floors that haven’t been professionally finished are prone to shrinkage over time, causing gaps or cracks in the wood. This can be caused by low humidity levels in the home or simply the aging process. A humidifier can help to prevent this by adding moisture to the air in your home.

Squeaky Planks

If your hardwood floor has a squeaky sound, it may be because the boards are rubbing against each other and causing a whistling noise. To fix this, you can use shims or a solid piece of lumber (also called cleats) to wedge in between the floor and the joists. This will help to keep the boards from rubbing up and down against each other, which is what causes the squeak.

Chipped Tile Fix

For minor chips, try using putty to fill them in. Once the putty dries, sand it smooth and then seal with a clear acrylic coat of stain to protect the area from future water stains or spills.

Larger chips or holes can be filled in with ceramic filler. Make sure the filler matches your tiles’ color and blend in as much as possible. Once the filler dries, it is best to protect it with a coating of clear acrylic or even urethane to make it stand up to high traffic and heavy furniture.

If you have a large chip in your tile floor, you can also use green tape to help mask the problem. This will isolate the chip and help to protect the surrounding area while you paint over it, which could otherwise result in uneven paint or a chipped look.

Scuff Marks & Other Stains

Scuffed and scratched hardwood floor can be a problem, especially in areas with lots of foot traffic or furniture that is moved around frequently. While sanding is a great way to remove surface scratches and stains, it can be difficult to get the floors looking their best without damaging the surrounding area.

In order to avoid this, it is important to use a soft sanding pad when sanding the floors. This will not only reduce the amount of damage done, but it will also allow you to see what areas need more sanding or attention before moving on.

A new layer of finish can also help to mask scuffs and scratches on hardwood floors, as well as provide protection against dirt and water stains. One of the best products for this purpose is Restore-A-Floor, which is a revolutionary restorer in a bottle that can revitalize old floors and protect them from further damage. To avoid costly errors, the best handyman company in Memphis recommends thoroughly reading and following all instructions to ensure the best results. For more details on floor repair and restoration click here.

Related Post